1What Electrical Services Do We Offer?

We provide a comprehensive range of electrical services for residential, commercial and industrial properties, including new wiring installations, full house wiring and rewiring, new home electrical inspections, old house wiring inspections, electrical fault inspections and troubleshooting, MCB, ELCB and RCCB replacement, circuit breaker trip repairs, electrical leakage and current leakage checks, RCD testing, Megger insulation testing, earthing system installation and testing, DB box replacement and upgrades, socket repairs, aircond point repair, water heater point repair, burnt wiring and connection repairs, lightning protection, surge protection, thermographic inspections, autogate installation, autogate repairs and rewiring, and commercial and industrial electrical solutions.

2 What Areas Do You Cover?

We provide electrical services throughout Kuala Lumpur, Selangor and the Klang Valley, including Petaling Jaya, Subang Jaya, Shah Alam, Puchong, Cheras, Ampang, Kajang, Seri Kembangan, Klang, Bangi, Putrajaya, Cyberjaya, Damansara, Kepong, Setapak, Wangsa Maju, Rawang, Sungai Buloh, Setia Alam and surrounding areas.

3Do You Provide Electrical Services for Homes and Shops?

Yes. We provide professional electrical services for residential properties, shops and commercial premises. Whether you need electrical repairs at home, troubleshooting at your shop, or more complex electrical work, we can inspect the problem and recommend the right solution.

4Do You Repair Lights, Ceiling Fans, Water Heaters and Aircond Electrical Problems?

Yes. We provide electrical repair and troubleshooting for lights, ceiling fans, water heaters and aircond systems. This includes faulty or flickering lights, light switches, ceiling fans, fan switches, water heater switches and wiring, aircond switches and wiring, as well as burnt connections, overheating, loose wiring and repeated tripping.

We can inspect the wiring, switches, connections and electrical supply to identify the cause of the problem and recommend the necessary repair.

5Why Can't I Turn My DB Breaker Back On After It Trips?

If an MCB or RCCB in your DB box trips and cannot be switched back on, it may indicate an electrical short circuit, current leakage, faulty appliance, damaged wiring, or another electrical fault. Do not repeatedly force the breaker back on, as this may be unsafe.

We can carry out proper fault finding, insulation resistance testing, RCD testing, current leakage checks and circuit inspections to identify the cause and recommend the appropriate repair.

If the breaker trips immediately every time you try to reset it, switch it off and contact us for a proper inspection.

6How Can I Tell if I Have an Electrical Leakage or Short Circuit?

Watch for warning signs such as frequent MCB or RCCB tripping, flickering lights, burning smells, hot sockets or switches, sparks, or electrical shocks. These may indicate electrical leakage, a short circuit or another electrical fault.

If you notice any of these signs, stop using the affected circuit if it is safe to do so and contact us for proper inspection and testing.

7Why Do I Keep Getting Shocked or My Power Keeps Tripping?

Frequent electrical shocks or repeated MCB or RCCB tripping can be caused by electrical leakage, poor earthing, faulty wiring, damaged appliances or other electrical faults. These problems should not be ignored. We can carry out the necessary testing to identify the cause and recommend the appropriate repair.

8What Should I Do If My Power Keeps Tripping?

If your power keeps tripping, do not repeatedly reset the breaker without finding out why. Turn off the affected circuit or appliance if it is safe to do so and contact us for proper inspection and testing. We can check the wiring, electrical leakage, insulation, earthing and protective devices to identify the cause.

9What Do You Check During a Safety Inspection?

During an electrical safety inspection, we check your wiring, DB box, earthing system, sockets, switches and electrical connections. We look for signs of loose connections, overheating, damaged wiring, poor earthing and other potential electrical hazards to make sure your electrical system is safe and working properly.

10Do You Have the Right Testing Equipment?

Yes. We are equipped with professional multimeters, RCD testers, socket testers, wire tracers, clamp meters, earth resistance testers, insulation resistance testers and other diagnostic equipment.

We bring the appropriate testing equipment to inspect, test and diagnose electrical problems accurately on-site.

11How Soon Can You Handle an Electrical Emergency?

We normally respond very quickly to electrical emergencies. One of our advantages is that we keep a wide range of MCBs, RCCBs, MCCBs, sockets, plugs and other electrical components in different specifications with us. This allows us to carry the required parts to the site and, in many cases, repair or replace the faulty component immediately without waiting for another supplier.

Of course, our availability depends on our schedule and location at the time you call. If we are already fully booked, we will let you know. Give us a call and we’ll check our availability and see how quickly we can assist you.

12Is Electrical Repair Expensive?

We are not the cheapest, but we believe our pricing is reasonable and fair for the quality of work and materials we provide. We use quality materials and brand-new components from trusted brands, rather than cheap, used or questionable parts.

Our priority is to provide safe, reliable and lasting repairs. We would rather do the job properly with the right materials than reduce the price by compromising on quality.

13What Makes Our Pricing Different?

Our pricing is based on the actual work required, not simply the number of power points or metres of wiring. We consider the site condition, existing wiring, materials required and scope of work before providing a quotation.

If you’re only looking for a price per foot or per power point without proper assessment, we’re probably not the service for you. We believe in fair and transparent pricing based on the actual work involved.

14What Brands and Materials Do You Use?

We work with trusted, high-quality brands such as Maxguard, EPS, Hager, ABB, Schneider and Kozuka, selected based on their technical specifications and product quality. We do not use low-grade components simply to reduce costs. If a job requires low-grade components, we will not take it.

15How Can Poor-Quality Electrical Work Lead to Problems?

Low-quality electrical work often means substandard materials, cheap components, or improper installation. This can lead to frequent tripping, short circuits, power failures or even dangerous electric leakage over time. Choosing the right electrician is key to ensuring lasting safety and peace of mind.

16Do You Match Online Platform Prices?

No, we don’t. Our pricing is not based on online platform prices. We use 100% original, brand-new products from trusted sources, rather than cheap or questionable components from unknown sellers. Our priority is product quality, safety and long-term reliability, not simply offering the lowest price.

17I Don’t Have Budget, Can You Use Cheap Materials?

No, we don’t. We never compromise on quality or safety. If you’re looking for cheap workmanship or low-grade components, we’re not the right choice. We use only materials that meet safety standards and ensure lasting reliability.

18How Can I Get a Quote or Book a Service?

Simply call or WhatsApp us at 012-870 2699 (Alex). We’ll ask a few questions about the problem and may ask you to send us some photos or videos. This helps us understand the situation before arranging an inspection or repair. Where possible, we’ll advise you on the next step and arrange a suitable time to visit.

Important Note:

WE’RE NOT THE CHEAPEST! We don’t compete on being the cheapest. Our commitment is to quality materials and reliable workmanship that prioritize safety, durability, and long-term performance. If your main concern is getting the lowest price, we might not be the right service for you.

Please also understand that we don’t quote based on “price per power point” or “price per foot of wiring” over the phone. Every project is different and we can only give an accurate price after understanding your specific requirements.